search in the APK ...

Type to start search (at least 3 letters)

graphic for Ampere v3.55

Ampere Vv3.55

Braintrapp
May 12th, 2022 || Android 4.1 +
Official
Download APK Did you ever felt, that one ChargerUSB cable set charges your device really fast and the other no...
version
Vv3.55
last update
May 12th, 2022
requirements
Android 4.1 +
File Size
10MB
CPU
N/A
permissions
downloads
+ 18.6K
price
N/A
About the APK:
Did you ever felt, that one ChargerUSB cable set charges your device really fast and the other not? Now, you can prove this with Ampere.
Measure the charging and discharging current of your battery.
PRO features:
- Widgets
- Notification
- Alerts on device
- Alerts on Android Wear
Not every device is supported because there are devices which lacks an appropriate measurement chip (or the interface) and they can not be supported at all. Please read the list of not supported phones at the end of the description.
It is only good for evaluate which ChargerUSB cable combo is working the best for you on the same device.
----
----
Start the app and wait ca. 10 seconds ("measuring" is on the display). After this time, the charging or discharging current will be shown.
The current depends on many things:
- Charger (USBACWireless)
- USB cable
- Phone type
- Current tasks running
- Display brightness
- WiFi state
- GPS state
Please don’t use the readings on this app as concrete science. However, the readings are good enough to relatively measure how various chargers and USB cables fair on the same device.
please use the settings option "Old measurement method". You can force the app with it to use the old measurement interface, if the Lollipop device has at least one.
Unfortunately some Samsung devices don’t give correct (measured) values (e.g.: S5), just the maximum possible charging current with the actual USB cablecharger configuration. This is a firmware problem.
----
The app measures the chargingdischarging current of the battery. If your phone is not connected to a charger, you see the discharging current which is negative. If you connect a charger then the current what the charger gives will be used to supply your phone and the remaining power will be charged into the battery.
If your phone consumes 300 mA without a charger connected (-300mA on the display), then a 500 mA charger will charge your battery maximum with 200 mA current (200mA on display).
----
The displayed current is an average value from 50 measurements minus the 10 upper values and the 10 lower values. The displayed current can be shaky or unstable or even zero which means, that the Android system provides unstable values. Every company uses different battery types and other hardware making it difficult to get accurate results about your charger.
----
LiPo batteries don’t draw the maximum for the full time it takes to charge the phone. If your battery is charged almost full then the charging current will be much less as by lower battery levels.
- A graph explaining LiPo charge stages: http:batteryuniversity.com_imgcontention1.jpg
- Dave’s (EEVBlog) LiPo Charging Tutorial: http:youtu.beA6mKd5_-abk
----
PhonesROMS compatible only with "Old measurement method" switched on and selected the right "Measurement interface":
➤ HTC One M7 M8
➤ LG G3
PhonesROMS reported to be not working with this app:
➤ Galaxy Grand Prime - fortuna3gdtv
➤ Galaxy Note2 - t03g, t03gchn, t03gchnduos, t03gcmcc, t03gctc, t03gcuduos
➤ Galaxy S3 - d2att, d2spr, d2vmu
➤ Galaxy Tab4 7.0 - degas3g
➤ HTC Desire 510 - htc_a11ul8x26
➤ HTC One S (ville), X (endeavoru), XL (evita)
➤ HTC Sensation 4G - pyramid
If the app doesn’t work on your device with pre-Lollipop Android version, then please read the first and the second posts in this XDA developer forum thread: http:goo.glpZqJg8 . Please post your problem with screenshots in the XDA thread.
Measure the charging and discharging current of your battery.

WHAT’S NEW
v3.53

* Preparations for Android 12

* Bug fixes and minor enhancements

Ampere FAQ: http://goo.gl/R8XgXX

For more info please read the change history: Settings => About Ampere => Change history

Note: When ampere would stuck in "measuring" state (after a firmware upgrade) please clear Amperes’s app cache.

1.) Open the "Android Settings app" => "Apps" => "Ampere"

2.) Clear all data under the "Storage" menu

3.) Restart Ampere

Notes:
- you can download APK from the above button 'Download APK'.
- the downloald button above is REAL! we're using here Adshrink service!
- We Are humans and we may make mistakes, please report below if there is an error.
logo for Her Majestys SPIFFING
Her Majestys SPIFFING
V1.0
Official
logo for Spotify Music
Spotify Music
V8.5.9.737
Official
logo for Modern Combat Versus: New Online Multiplayer FPS
Modern Combat Versus: New Online Multiplayer FPS
V1.17.32
Official
logo for Warhammer 40,000: Freeblade
Warhammer 40,000: Freeblade
V5.8.2
Official
logo for PUBG MOBILE
PUBG MOBILE
V2.1.0
Official
logo for Facebook
Facebook
V377.0.0.0.1
Official